Vision Set-Up Manager
This is an in-depth video that will show you how to install the Vision Set-Up Manager
The Vision Set-up manager is configured by what “you” the user wants. Here is a quick way of how it works
In reference to these instructions see picture on right. |
---|
1.) Plug in unit with charging cable, then connect cable to USB input in PC and Power on. (Note: before powering on make sure side switches are up) |
2.) Once plugged in software will connect to your camera displaying your settings on the right hand side within current setting window. |
3.) Toggle which settings/Modes are right for you, in Initial Settings you can set your password & badge ID (Note: Do not change your device ID) In Mode Select and Settings you can select from 3 modes below. |
Normal Mode: Allows Side Switch Configuration Video, Audio, Camera modes |
Easy Mode: Simply a video recorder, disables side switches |
Pre-Record Mode: Allows for 30 sec buffer(Pre-Event Recording) & Enabled (Event Recording) when V-Button is pressed. |
Congrats your configuration is complete!
Note: The Vision Syncs up with your PC so adjusting the time should be a piece of cake. Yum. |
The Vision Set-Up manager is a software that constantly runs in the background of your PC.
The picture below shows the Windows 10 task bar & hidden icons
Powering off: Right click on the icon and press exit.
Was this Article Helpful? |
"When I click on connect to computer nothing happens?"
Don't be alarmed if you stumble across this issue. You just need to access your file explorer in Windows or enable auto-play.